ASI INTERNATIONAL -- MANGANESE METAL & ALLOYS -- 3439-00F049414
===================== Product Identification ===================== Product ID:MANGANESE METAL & ALLOYS MSDS Date:05/01/1994 FSC:3439 NIIN:00F049414 === Responsible Party === Company Name:ASI INTERNATIONAL Address:4595 VAN EPPS ROAD City:CLEVELAND State:OH ZIP:44131-5000 Country:US Info Phone Num:216-485-1800 Emergency Phone Num:216-485-1800 CAGE:ASSII === Contractor Identification === Company Name:ASI INTERNATIONAL Address:4595 VAN EPPS ROAD City:CLEVELAND State:OH ZIP:44131-5000 Country:US Phone:216-485-1800 CAGE:ASSII Company Name:ELKEM METALS CO Box:UNKNOW CAGE:7V007 ============= Composition/Information on Ingredients ============= Ingred Name:CHROMIUM METAL, CHROMIUM, CHROME (KNOWN CARCINOGEN BY NTP; IARC CARC - GROUP 3) *96-2* CAS:7440-47-3 RTECS #:GB4200000 Fraction by Wt: <0.5% ACGIH TLV:0.5 MG/CUM EPA Rpt Qty:1 LB DOT Rpt Qty:1 LB Ingred Name:NICKEL (SUSPECTED ANIMAL/HUMAN CARCINOGEN BY IARC GROUP 2B, SUSPECTED CARCINOGEN BY NTP) *96-2* CAS:7440-02-0 RTECS #:QR5950000 Fraction by Wt: <0.5% Other REC Limits:1 MG/CUM OSHA PEL:1 MG/CUM ACGIH TLV:0.05 MG/CUM IC Ingred Name:CARBON, ACTIVATED CARBON, GRAPHITE CAS:7440-44-0 RTECS #:FF5250100 Fraction by Wt: 0-7% OSHA PEL:10 MG/CUM ACGIH TLV:10 MG/CUM Ingred Name:SILICON CAS:7440-21-3 RTECS #:VW0400000 Fraction by Wt: 0.1-7% ACGIH TLV:10 MG/CUM Ingred Name:MANGANESE *96-2* CAS:7439-96-5 RTECS #:OO9275000 Fraction by Wt: 75-100% OSHA PEL:5 MG/CUM ACGIH TLV:5 MG/CUM (DUST) Ingred Name:IRON *96-2* CAS:7439-89-6 RTECS #:NO4565500 Fraction by Wt: 0-15% ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO Health Hazards Acute and Chronic:HIGH CONCENTRATIONS CAN CAUSE IRRITATION TO THE EYES, NOSE & THROAT. INHALATION: MAY CAUSE MANGANESE POISONING, CNS DISORDERS, PARKINSON DISEASE. PERMANENT INJURY MAY OCCUR IF NOT TREATED. MAY CAUSE M OTTLING OF THE LUNGS (SIDEROSIS), A BENIGN PNEUMOCONIOSIS. INGESTION: MAY CAUSE MANGANESE POISONING. Explanation of Carcinogenicity:SEE INGREDIENTS. Effects of Overexposure:IRRITATION, MANGANESE FUME FEVER, APATHY, DROWSINESS, SLEEP DISTURBANCES, MUSCULAR TWITCHING, SPASTIC GAIT, EMOTION CONTROL PROBLEMS. Medical Cond Aggravated by Exposure:PRE-EXISTING CHRONIC OBSTRUCTIVE LUNG DISEASE. ======================= First Aid Measures ======================= First Aid:INHALATION: REMOVE TO FRESH AIR. SUPPORT BREATHING AS REQUIRED. SKIN: WASH AREA W/MILD SOAP & WATER. EYES: FLUSH W/WATER FOR 15 MINS. OBTAIN MEDICAL ATTENTION IN ALL CASES. ===================== Fire Fighting Measures ===================== Extinguishing Media:DRY POWDER, DRY SAND/CO2. Fire Fighting Procedures:ALLOW FIRE TO BURN ITSELF OUT. DON'T DISTURB BURNING METAL WHILE EXTINGUISHING THE FIRE. NITROGEN BLANKET MAY NOT EXTINGUISH MANGANESE METAL & ALLOYS FIRE. Unusual Fire/Explosion Hazard:NON-COMBUSTIBLE. MANGANESE METAL & ALLOYS CAN BE READILY IGNITED, PROPAGATE FLAME & GENERATE PRESSURE/EXPLODE. AUTOIGNITION TEMP: MANGANESE METAL 465F. ================== Accidental Release Measures ================== Spill Release Procedures:CLEANUP PERSONNEL SHOULD WEAR APPROPRIATE RESPIRATORY PROTECTIVE EQUIPMENT. AVOID THE USE OF COMPRESSED AIR TO MANEUVER LEAKS OF FINE MATERIAL. FINE MATERIAL SHOULD BE SWEPT UP/VACUUMED. KEEP DRY MATE RIAL & WET MATERIAL SEPARATED. ====================== Handling and Storage ====================== Handling and Storage Precautions:KEEP MATERIAL DRY WHEN STORING FOR LONG PERIODS OF TIME. KEEP AWAY FROM SPARKS/OTHER IGNITION SOURCES. VENTILATE AREAS OF EXTENDED STORAGE. Other Precautions:AVOID ADDING WET PRODUCT TO MOLTEN MATERIALS. AVOID GENERATION OF AIRBORNE DUSTS. GRINDING WET MATERIAL MAY BE HAZARDOUS DUE TO THE POSSIBLE EVOLUTION OF HYDROGEN, A HIGHLY EXPLOSIVE GAS. AVOID CONTAM INATION OF WORK CLOTHING. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:IN DUSTY AREAS, USE NIOSH APPROVED RESPIRATOR. IF ARSINE/PHOSPHINE PROTECTION IS NECESSARY, USE SUPPLIED AIR/ORGANIC VAPOR/ACID GAS CARTRIDGES. Ventilation:REQUIRED Protective Gloves:RECOMMENDED DURING HANDLING Eye Protection:SAFETY GOGGLES Work Hygienic Practices:THOROUGHLY CLEAN AREAS/EQUIPMENT TO MAINTAIN PRIOR DUST DISTURBING/IGNITION SOURCES ACTIVITIES. Supplemental Safety and Health ================== Physical/Chemical Properties ================== Melt/Freeze Pt:M.P/F.P Text:1958-2273F Spec Gravity:3.9-7.4 Solubility in Water:INSOLUBLE Appearance and Odor:SILVERY METALLIC W/BROWN TO BLACK OXIDE COATING; ODORLESS ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES ACIDS, OXIDES OF CONSTITUENT ELEMENTS. Stability Condition to Avoid:MOISTURE, SPARKS/OTHER IGNITION SOURCES Hazardous Decomposition Products:PHOSPHINE, HYDROGEN, ARSINE, SILANES & OTHER TOXIC/EXPLOSIVE GASES. ==================== Disposal Considerations ==================== Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL REGULATIONS. AVOID REPACKING WET MATERIAL IN SEALED CONTAINERS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.