PPG INDUSTRIES -- DELTHANE ULTRA, DXR80 -- 8010-00F006031
=====================  Product Identification  =====================

Product ID:DELTHANE ULTRA, DXR80
MSDS Date:01/01/1987
FSC:8010
NIIN:00F006031
MSDS Number: BBTTJ
=== Responsible Party ===
Company Name:PPG INDUSTRIES/CLEVELAND, OH 44111
Emergency Phone Num:(304) 843-1300
CAGE:EO498
=== Contractor Identification ===
Company Name:PPG INDUSTRIES/CLEVELAND, OH 44111
CAGE:EO498

=============  Composition/Information on Ingredients  =============

Ingred Name:POLYMERIC ISOCYANATE
Fraction by Wt: 85%

Ingred Name:PROPYLENE GLYCOL METHYL ETHER ACETATE
CAS:108-65-6
RTECS #:AI8925000
Fraction by Wt: 15%

Ingred Name:1,6-DIISOCYANATOHEXANE  (HEXAMETHYLENE DIISOCYANATE)
CAS:822-06-0
RTECS #:MO1740000
Fraction by Wt: 5%
ACGIH TLV:0.005 PPM; 9192
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

Effects of Overexposure:SKIN, EYE & RESP TRACT IRRIT, HEADACHE,
    DIZZINESS, STAGGERING GAIT, CONSCIOUSNESS OR COMA.

=======================  First Aid Measures  =======================

First Aid:INHALATION: REMOVE TO FRESH AIR. IF BREATHING DIFFICULTY
    PERSISTS, OR OCCURS LATER CONSULT PHYSICIAN/HAVE LABEL/MSDS
    INFORMATION AVAILABLE. EYE: FLUSH W/PLENTY OF WATER FOR 15 MINUTES.
    CALL PHYSICIAN.  SKIN: WASH WITH SOAP & WATER.

=====================  Fire Fighting Measures  =====================

Flash Point:147F PMCC
Lower Limits:1.3%
Extinguishing Media:CO2, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:WATER SPRAY MAY BE INEFFECTIVE. FOG NOZZLES
    ARE PREFERABLE.
Unusual Fire/Explosion Hazard:WATER TO COOL CLOSED CONTAINERS TO
    PREVENT PRESSURE BUILD-UP & POSSIBLE AUTOIGNITION OR EXPLOSION.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAMES, HOT
    SURFACES & ELECTRICAL, STATIC OR FRICTIOL SPARKS). AVOID BREATHING
    VAPORS. VENTILATE AREA. REMOVE WITH INERT ABSBENT & NON-SPARKING
    TOOLS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T STORE >120F. STORE LARGE QTYS IN
    BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASII
    COMBUSTIBLE LIQUIDS. DON'T TAKE INTERNALLY.
Other Precautions:INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING &
    INHALING CONTENTS CAN BE HARMFUL OR FATAL. DON'T FLAME CUT, BRAZE
    OR WELD/O NIOSH APPROVED RESPIRATORS OR APPROPRIATE VENTILATION.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:POSITIVE AIR SUPPLIED RESPIRATOR APPROVED UNDER
    NIOSH/MSHA.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:17.2

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
WATER, ALCOHOLS, & STRONG BASES.
Stability Condition to Avoid:TEMPS >50C (122F) MAY CAUSE THIS PRODUCT
    TO POLYMERIZE.
Hazardous Decomposition Products:CO, NOX, HYDROGEN CYANIDE,
    HEXAMETHYLENE DIISOCYANATE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS. DON'T INCINERATE CLOSED CONTAINERS.
    FIRE-FIGHTERS SHOULD WEAR SCBA.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.