UNION CARBIDE CORP LINDE DIV -- SULFUR HEXAFLUORIDE -- 6830-00-985-7283
===================== Product Identification ===================== Product ID:SULFUR HEXAFLUORIDE MSDS Date:02/01/1986 FSC:6830 NIIN:00-985-7283 === Responsible Party === Company Name:UNION CARBIDE CORP LINDE DIV Address:39 OLD RIDGEBURY RD Box:NA City:DANBURY State:CT ZIP:06817-0001 Country:US Info Phone Num:203-794-2000 Emergency Phone Num:203-794-2000 CAGE:36346 === Contractor Identification === Company Name:HAMPTON ROADS SUPPLY UNION CARBIDE LINDE DIVISION Address:3450 VIRGINIA BEACH BLVD Box:12567 City:NORFOLK State:VA ZIP:23502-3123 Country:US CAGE:7D711 Company Name:UNION CARBIDE CORP LINDE DIV Address:39 OLD RIDGEBURY RD Box:City:DANBURY State:CT ZIP:06817-0001 Country:US Phone:800-822-4357; 304-744-3487 CAGE:36346 ============= Composition/Information on Ingredients ============= Ingred Name:SULFUR HEXAFLUORIDE CAS:2551-62-4 RTECS #:WS4900000 Fraction by Wt: 100% OSHA PEL:1000 PPM ACGIH TLV:1000 PPM; 9192 ===================== Hazards Identification ===================== Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Health Hazards Acute and Chronic:INGST: UNLIKELY ROUTE BUT FROSTBITE OF THE LIPS/MOUTH MAY RESULT FROM CONTACT. SKIN/EYE: NO HARMFUL EFFECTS FROM VAPOR. LIQUID MAY CAUSE FROSTBITE INHAL: ASPHYXIANT. HIGH CONCENTRATIONS M AY CUSE HEADACHES,DROWINESS,DIZZINESS,EXCITATION, EXCESS SALIVATION,VOMITING,UNCONSCIOUSNESS & POSSIBLE DEATH Effects of Overexposure:DECOMPOSITION PRODUCTS GENERATED AT HIGH TEMPERATURES MAY BE IRRITATING. Medical Cond Aggravated by Exposure:OVEREXPOSURE IS UNLIKELY TO AGGRAVATE EXISTING MEDICAL CONDITIONS. ======================= First Aid Measures ======================= First Aid:SKIN: IMMEDIATELY WARM FROSTBITE AREA W/WARM WATER(NOT TO EXCEED 105F).IN CASE OF MASSIVE EXPOSURE,REMOVE CLOTHING WHILE SHOWERING W/WARM WTR.CALL PHYSICIAN. EYE: IMMEDIATELY FLUSH EYES THOROUGHTLY W/WARM WATER FOR 15 MINS. CALL PHYSICIANINHL: REMOVE TO FRESH AIR. GIVE ARTIFICIAL RESPIRATION IF NOT BREATHING. GIVE OXYGEN IF BREATHING IS DIFFICULT. CALL PHYSICIAN. ===================== Fire Fighting Measures ===================== Flash Point:NA Lower Limits:NA Upper Limits:NA Extinguishing Media:SULFUR HEXAFLUORIDE CANNOT CATCH FIRE. USE MEDIA APPROPRIATEFOR SURROUNDING FIRE. Fire Fighting Procedures:EVACUATE ALL PERSONNEL FROM DANGER AREA. IMMEDIATELY DELUGE CONTAINERS W/WATER SPRAY FROM MAXIMUM DISTANCE UNTIL COOL,THEN MOVE CONTNRS AWAY FROM FIRE AREA. Unusual Fire/Explosion Hazard:GAS CANNOT CATCH FIRE. CONTAINER MAY RUPTURE DUE TO HEAT OF FIRE. NO PART OF CONTAINER SHOULD BE SUBJECTED TO TEMP. HIGHER THAN 125F (52C). ================== Accidental Release Measures ================== Spill Release Procedures:REMOVE ALL PERSONNEL TO SAFE DISTANCE. SHUT OFF LEAK IF W/O RISK. VENTL AREA OF LEAK/MOVE LEAKING CONTNR TO WELL VENTL AREA. USE SELF CONTAINING BREATHING APPARATUS IF NEEDED. ====================== Handling and Storage ====================== Handling and Storage Precautions:NEVER WORK ON A PRESSURIZED SYSTEM. IF THERE IS A LEAK CLOSE CYLINDER VALVE,BLOW DOWN SYSTEM BY VENTING TO A SAFE PLACE, THEN REPAIR THE LEAK. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:SELECT IN ACCORDANCE WITH OSHA 29 CFR 1910.134. RESPIRATORS SHALL BE ACCEPTABLE TO MSHA AND NIOSH Ventilation:LOCAL EXHAUST PREFERRED. MECHANICAL IS ACCEPTABLE Protective Gloves:PREFERRED FOR CYLINGER HANDLING Eye Protection:SELECT WITH OSHA 29 CFR 1910.133 Other Protective Equipment:METATARSAL SHOES FOR CYLINDER HANDLING. SELECT IN ACCORDANCEW/OSHA 29 CFR 1910.132 & 1910.133 Supplemental Safety and Health NK ================== Physical/Chemical Properties ================== HCC:G3 Boiling Pt:B.P. Text:-82.8F Vapor Pres:320 PSIG Vapor Density:5.11 @ 20C Spec Gravity:1.88 @ -50.8C Evaporation Rate & Reference:HIGH Solubility in Water:NEGLIGIBLE Appearance and Odor:COLORLESS, ODORLESS GAS AT NORMAL TEMPERATURE AND PRESSURE Percent Volatiles by Volume:100 ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES EXPLODES VIOLENTLY IN CONTACT WITH DISILANE Stability Condition to Avoid:TEMPERATURE IN EXCESS OF 800C. Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE TOXIC FUMES OF FLUORIDES AND SULFUR OXIDES. ==================== Disposal Considerations ==================== Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING AREA.KEEP PERSONNEL AWAY. DISCARD ANY PRODUCT,RESIDUE, DISPOSABLE CONTAINERS/LINERS IN ACCEPTABLE MANNERIN COMPLIANCE WITH FEDERAL, STATE, & LOCAL REGULA TIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.