ONCOR INC -- THIMEROSAL -- 6810-00F048706
=====================  Product Identification  =====================

Product ID:THIMEROSAL
MSDS Date:03/16/1994
FSC:6810
NIIN:00F048706
=== Responsible Party ===
Company Name:ONCOR INC
Address:209 PERRY PKY SUITE 7
City:GAITHERSBURG
State:MD
ZIP:20877-5000
Country:US
Info Phone Num:301-963-3500/800-776-6267
Emergency Phone Num:301-963-3500/800-776-6267
CAGE:016E9
=== Contractor Identification ===
Company Name:ONCOR INC
Address:209 PERRY PKY SUITE 7
City:GAITHERSBURG
State:MD
ZIP:20877-5000
Country:US
Phone:301-963-3500/800-776-6267
CAGE:016E9

=============  Composition/Information on Ingredients  =============

Ingred Name:THIMEROSAL, MERCURY, ((-CARBOXYPHENYL)THIO)ETHYL-, SODIUM
    SALT      *96-2*
CAS:54-64-8
RTECS #:OV8400000
OSHA PEL:0.01 MG/CUM
ACGIH TLV:0.1 MG/CUM

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:ORAL LD50(RAT): 75 MG/KG
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:MAY BE FATAL IF INHALED,
    SWALLOWED/ABSORBED THROUGH SKIN. CAUSES EYE & SKIN IRRITATION.
    MATERIAL IS IRRITATING TO MUCOUS MEMBRANES & UPPER RESPIRATORY
    TRACT. MAY CAUSE NERVOUS SYSTEM DISTURBANCES. ALL ERGIC REACTION TO
    DUST IF INHALED, INGESTED/CONTACT W/SKIN. (SEE SUPP)
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION.

=======================  First Aid Measures  =======================

First Aid:EYES/SKIN: FLUSH W/WATER FOR 15 MINS. INHALATION: REMOVE TO
    FRESH AIR. GIVE CPR/OXYGEN IF NEEDED. INGESTION: WASH OUT MOUTH
    W/WATER PROVIDED PERSON IS CONSCIOUS. OBTAIN MEDICAL ATTENTION IN
    ALL CASES.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:WATER SPRAY, CO2, DRY CHEMICAL POWDER/APPROPRIATE
    FOAM.
Fire Fighting Procedures:WEAR SCBA & PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:EMITS TOXIC FUMES UNDER FIRE CONDITIONS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WEAR SCBA, RUBBER BOOTS & HEAVY RUBBER GLOVES.
    SWEEP UP, PLACE IN A BAG & HOLD FOR WASTE DISPOSAL. AVOID RAISING
    DUST. VENTILATE AREA & WASH SITE AFTER MATERIAL PICKUP IS COMPLETE.

======================	Handling and Storage  ======================

Handling and Storage Precautions:KEEP TIGHTLY CLOSED. LIGHT SENSITIVE.
    STORE IN A COOL, DRY PLACE.
Other Precautions:AVOID CONTACT W/EYES, SKIN & CLOTHING. AVOID
    PROLONGED/REPEATED EXPOSURE. HIGHLY TOXIC.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR APPROPRIATE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:USE ONLY IN A CHEMICAL FUME HOOD.
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:SAFETY SHOWER, EYE BATH.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Melt/Freeze Pt:M.P/F.P Text:449-451.4F
Appearance and Odor:WHITE POWDER

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS, STRONG BASES.
Stability Condition to Avoid:LIGHT
Hazardous Decomposition Products:CO, CO2, SULFUR OXIDES,
    MERCURY/MERCURY OXIDES.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IAW/FEDERAL, STATE & LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.