PARKER PAINT -- VELVA KOLOR WHITE TINT BASE, 4650 -- 8010-00N024769
===================== Product Identification ===================== Product ID:VELVA KOLOR WHITE TINT BASE, 4650 MSDS Date:01/26/1989 FSC:8010 NIIN:00N024769 MSDS Number: BMNVT === Responsible Party === Company Name:PARKER PAINT Box:11047 City:TACOMA State:WA ZIP:98411-0047 Country:US Info Phone Num:206-473-1122 Emergency Phone Num:206-473-1122 Preparer's Name:J BURNWORTH CAGE:9H480 === Contractor Identification === Company Name:PARKER PAINT Address:3003 SOUTH TACOMA WAY Box:11047 City:TACOMA State:WA ZIP:98409 Country:US Phone:253-473-1122 CAGE:9H480 ============= Composition/Information on Ingredients ============= Ingred Name:SILICA, CRYSTALLINE - FUSED CAS:60676-86-0 RTECS #:VV7328000 Fraction by Wt: 3% OSHA PEL:SEE TABLE Z3 ACGIH TLV:0.1 MG/M3 RDUST;9293 ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:ACUTE:OVEREXP MAY CAUSE HDCH, NAUS, SKIN AND EYE IRRITATION. CHRONIC:UNPROTECTED OVEREXP TO MISTS FROM SPRAY APPLICATION MAY CAUSE LUNG DISEASE (SILICOSIS). INHAL OF HIGH CONCENTRATIONS OF VAPORS MAY CAUSE HDCH, NAUS & IRRITATION OF NOSE/THROAT/LUNGS. EYE CONTACT MAY CAUSE IRRIT/BURN OF EYES. RPTD (EFTS OF OVEREXP) Explanation of Carcinogenicity:NOT RELEVANT. Effects of Overexposure:HLTH HAZ:LIQUID CONTACT MAY CAUSE SKIN IRRITATION AND DERMATITIS. SKIN ABSORPTION-NONE KNOWN AT THIS TIME. SWALLOWING CAN CAUSE GI IRRITATION, NAUS, VOMIT & DIARR. VOMIT CAN RESULT IN ASPIRATION OF MA TERIAL INTO LUNGS WHICH CAN CAUSE CHEMICAL PENUMONITIS. Medical Cond Aggravated by Exposure:NONE KNOWN AT THIS TIME. ======================= First Aid Measures ======================= First Aid:INHAL:REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED, APLY ARTF RESP. CONSULT PHYS. EYE:WASH WITH CLEAN WATER FOR AT LEAST 15 MIN. CONSULT PHYS. SKIN:WASH AFFECTED AREA WITH SOAP AND WATER. REMOVE CONT AMINATED CLOTHING. CONSULT PHYS. INGEST:DRINK 1 OR 2 GLASSES OF WATER TO DILUTE. CONSULT PHYS OR POISON CONTROL CENTER IMMED. ===================== Fire Fighting Measures ===================== Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL. Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT . Unusual Fire/Explosion Hazard:WATER MAY BE USED TO COOL CLOSED CONTAINERS TO PREVENT PRESSURE BUILDUP AND EXPLOSION WHEN EXPOSED TO EXTREME HEAT. ================== Accidental Release Measures ================== Spill Release Procedures:VENTILATE AREA. PREVENT SKIN AND EYE CONTACT AND BREATHING OF VAPOR. CONTAIN AND REMOVE WITH INERT ABSORBENT. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:DO NOT STORE ABOVE 200F. Other Precautions:DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:NOT REQUIRED FOR BRUSH AND ROLL APPLICATION, WEAR NIOSH/MSHA APPROVED PROPERLY FITTED (TC-23C) VAPOR/PARTICULATE RESPIRATOR UNTIL ALL VAPORS AND SPRAY MIST ARE EXHAUSTED. Ventilation:PROVIDE SUFFICIENT VENT IN VOL & PATTERN TO KEEP AIR CONTAM CONC BELOW APPLIC OSHA PEL/ACGIH TLV OCCUP EXPOS LIMITS. Protective Gloves:IMPERVIOUS GLOVES. Eye Protection:CHEM WORK GOG W/FULL LNGTH FSHLD. Other Protective Equipment:COVERALLS, HOOD ARE RECOM DURING SPRAY APPLICATN. PROT CREAMS MAY BE USED FOR EASE OF CLEANUP, NOT FOR PROTECTION. Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING THE RESTROOM. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== HCC:N1 Boiling Pt:B.P. Text:212F,100C Vapor Pres:SEE INGRED Vapor Density:LTR/AIR Spec Gravity:1.3 Evaporation Rate & Reference:SLOWER THAN ETHER Solubility in Water:DILUTABLE Appearance and Odor:WHITE COLORED LIQUID WITH AMMONIACAL ODOR. ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES NONE KNOWN AT THIS TIME. Stability Condition to Avoid:DO NOT HEAT ABOVE 200F. Hazardous Decomposition Products:NONE KNOWN AT THIS TIME. ==================== Disposal Considerations ==================== Waste Disposal Methods:DO NOT ALLOW MATERIAL TO CONTAMINATE GROUND WATER SYSTEMS. ABSORB LARGE SPILLS WITH SAND, CLAY OR DIATOMACEOUS EARTH. DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND FEDERAL DISPOSAL REQUIREMENTS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.