FIDELITY CHEMICAL PRODUCTS CORP -- NICKEL CHLORIDE SOLUTION -- 6850-00N033548
===================== Product Identification ===================== Product ID:NICKEL CHLORIDE SOLUTION MSDS Date:07/28/1987 FSC:6850 NIIN:00N033548 === Responsible Party === Company Name:FIDELITY CHEMICAL PRODUCTS CORP Address:470 FRELINGHUYSEN AVE City:NEWARK State:NJ ZIP:07114 Country:US Info Phone Num:201-242-4110 Emergency Phone Num:201-242-4110 Preparer's Name:KASHI BANERJEE CAGE:07653 === Contractor Identification === Company Name:FIDELITY CHEMICAL PRODUCTS CORP Address:470 FRELINGHUYSEN AVE Box:City:NEWARK State:NJ ZIP:07114 Country:US Phone:973-242-4110 CAGE:07653 Company Name:FIEBING CO INC Address:516 S 2ND ST Box:04125 City:MILWAUKEE State:WI ZIP:53204-1613 Country:US Phone:414-271-5011 CAGE:98857 ============= Composition/Information on Ingredients ============= Ingred Name:NICKEL CHLORIDE (SARA III) CAS:7718-54-9 RTECS #:QR6475000 Fraction by Wt: 13.5% OSHA PEL:1 MG NI/M3 ACGIH TLV:0.1 MG NI/M3; 9293 EPA Rpt Qty:100 LBS DOT Rpt Qty:100 LBS Ingred Name:NON HAZARDOUS INGREDIENTS Fraction by Wt: BALANCE ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO Health Hazards Acute and Chronic:INHALATION OF MIST/VAPOR CAN CAUSE IRRITATION OF UPPER RESPIRATORY TRACT. SKIN CONTACT MAY BE IRRITATING AND CAN CAUSE ALLERGIC DERMATITIS ("NICKEL ITCH") CHARACTERIZED BY ITCHING AND SKIN ERUPTIONS. EYE CONTACT WITH SOLUTION MAY CAUSE IRRITATION. INGESTION CAN CAUSE GIDDINESS, NAUSEA AND VOMITING. (EFTS OF OVEREXPOS) Explanation of Carcinogenicity:NICKEL CMPD:GROUP 2B (IARC), ANTICIPATED TO BE A CARCINOGEN (NTP) Effects of Overexposure:HLTH HAZ:ACUTE:EYE:CAUSES IRRITATION. SKIN:CAUSES IRRITATION. PROLONGED OR REPEATED CONTACT CAUSES DERMATITIS. INHAL:CAUSES IRRITATION OF UPPER RESPIRATORY TRACT. INGEST:CAUSES DAMAGE TO GASTROINTESTI NAL TRACT. CHRONIC:UNKNOWN. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:EYE:IMMED FLUSH W/WATER FOR AT LEAST 15 MIN, INCLUDING UNDER EYELIDS. CONTACT MD IMMED. SKIN:THOROUGHLY WASH CONTAMINATED AREA W/MILD SOAP AND WATER. PREVENT FURTHER CONTACT. REMOVE CONTAMINATED CLOTH ING UNDER SHOWER. CONTACT MD AS SOON ASPOSSIBLE. INHAL:REMOVE TO FRESH AIR. CONTACT MD AS SOON AS POSSIBLE. INGEST:GIVE VICTIM LARGE QUANTITY OF WATER/MILK TO DRINK. CONTACT MD AS SOON AS POSSIBLE. ===================== Fire Fighting Measures ===================== Flash Point:NON FLAMMABLE Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE . Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT . Unusual Fire/Explosion Hazard:FUMES AND VAPORS MAY DEVELOP WHEN MATERIAL IS HEATED. ================== Accidental Release Measures ================== Spill Release Procedures:NEUTRALIZE SPILLED MATERIAL WITH SAND, CRUSHED LIMESTONE, SODA ASH OR ANY OTHER NON-COMBUSTIBLE ABSORBENT. PUT MATERIAL IN A POLY LINED DRUM. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:BEFORE MOVING DRUM BE SURE CLOSURES ARE SECURLY FASTENED. KEEP AWAY FROM CYANIDES, WATER REACTIVE MATERIAL, WATER SOURCES AND SEWERS. Other Precautions:KEEP DRUM UPRIGHT. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR. Ventilation:LOCAL EXHAUST OR MECHANICAL (GENERAL) VENTILATION IS ADEQUATE. AIR VELOCITY SHOULD BE 100 LPM. Protective Gloves:NEOPRENE OR PVC GLOVES. Eye Protection:CHEMICAL WORKERS GOGGLES . Other Protective Equipment:NEOPRENE OR PVC APRON, HARD HAT. Work Hygienic Practices:KEEP DRUM CLOSED WHEN NOT IN USE. Supplemental Safety and Health NONE SPECIFIED BY MANUFACTURER. ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:>212F,>100C Spec Gravity:1.34 (H*2O = 1) Solubility in Water:COMPLETE Appearance and Odor:CLEAR GREEN LIQUID WITH SLIGHT ODOR ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES CYANIDES AND WATER REACTIVE MATERIALS. Stability Condition to Avoid:EXCESS HEAT Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY PRODUCE NI*O AND HCL ==================== Disposal Considerations ==================== Waste Disposal Methods:FOLLOW LOCAL, STATE AND FEDERAL REGULATIONS FOR DISPOSAL. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.