=====================  Product Identification  =====================

Product ID:4830, SATIN GLOW WHITE
MSDS Date:01/01/1991
FSC:8010
NIIN:00N033452
MSDS Number: BNVRY
=== Responsible Party ===
Company Name:PARKER PAINT
Box:11047
City:TACOMA
State:WA
ZIP:98411-0047
Country:US
Info Phone Num:206-473-1122
Emergency Phone Num:206-473-1122
Preparer's Name:J. BURNWORTH
CAGE:9H480
=== Contractor Identification ===
Company Name:PARKER PAINT
Address:3003 SOUTH TACOMA WAY
Box:11047
City:TACOMA
State:WA
ZIP:98409
Country:US
Phone:253-473-1122
CAGE:9H480

=============  Composition/Information on Ingredients  =============

Ingred Name:ETHYLENE GLYCOL  (SARA III). VP:0.1 @ 68F.
CAS:107-21-1
RTECS #:KW2975000
Fraction by Wt: 1.23%
OSHA PEL:50 PPM, C
ACGIH TLV:50 PPM VAPOR, C
EPA Rpt Qty:1 LB
DOT Rpt Qty:1 LB

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHAL:INHAL OF HIGH CONCS OF VAPS MAY
    CAUSE HDCH, NAUS & IRRIT OF NOSE, THROAT & LUNGS. SKIN:RPTD LIQ
    CONT MAY CAUSE IRRIT & DERM. EYE:CONT MAY CAUSE IRRIT OR BURNING.
    INGEST:SWALLOWING CAN CAUSE GI I RRIT, NAUS, VOMIT & DIARR. VOMIT
    CAN RSLT IN ASPIR OF MATL INTO LUNGS WHICH CAN CAUSE CHEM PNEUM.
    (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:ACUTE:(SHORT TERM) OVEREXP MAY CAUSE
    HDCH, NAUS, SKIN & EYE IRRIT. CHRONIC:(LONG TERM) UNPROTECTED
    OVEREXP TO MISTS FROM SPRAY APPLICATION MAY CAUSE LUNG DISEASE
    (SILICOSIS).
Medical Cond Aggravated by Exposure:NONE KNOWN AT THIS TIME.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. IF BRTHG HAS STOPPED, APPLY ARTF
    RESP. CALL MD. EYE:WASH W/CLEAN WATER FOR AT LST 15 MINS. CALL MD.
    SKIN:WASH AFFECTED AREAS W/SOAP & WATER. REMOVE CONTAM CLTHG. CALL
    MD. IN GEST:DRINK 1 OR 2 GLASSES OF WATER TO DILUTE. CALL MD OR
    POISON CONTROL CENTER IMMED.

=====================  Fire Fighting Measures  =====================

Lower Limits:3.2%
Upper Limits:15.2%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WATER MAY BE USED TO COOL CLOSED
    CONTAINERS TO PREVENT PRESSURE BUILD UP & EXPLOSION WHEN EXPOSED TO
    EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA. PREVENT SKIN & EYE CONTACT &
    BREATHING OF VAPOR. CONTAIN & REMOVE W/INERT ABSORBENT. ABSORB
    LARGE SPILLS W/SAND, CLAY OR DIATOMACEOUS EARTH.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 200F.
Other Precautions:DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF
    CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT REQUIRED FOR BRUSH & ROLL APPLICATION. FOR
    SPRAY APPLICATION, WEAR A PROPERLY FITTED NIOSH/MSHA APPROVED
    (TC-23C) VAPOR/PARTICULATE RESPIRATOR UNTIL ALL VAPORS & SPRAY MIST
    ARE EXHAUSTED.
Ventilation:PROVIDE SUFFICIENT VENT IN VOL & PATTERN TO KEEP AIR CONTAM
    CONC BELOW APPLIC OSHA PEL OR ACGIH TLV OCCUP EXPOS LIMITS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEM WORK GOGG/FULL LENGTH FCSHLD.
Other Protective Equipment:COVERALLS, GLOVES & HOOD ARE RECOM DURING
    SPRAY APPLICATION, PROT CREAMS MAY BE USED FOR EASE OF CLEAN-UP,
    NOT FOR PROT.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING THE RESTROOM.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Vapor Pres:SEE ING
Vapor Density:LTR/AIR
Spec Gravity:1.4 (H*2O=1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:WHITE COLORED LIQUID W/AMMONIACAL ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN AT THIS TIME.
Stability Condition to Avoid:DO NOT HEAT >200F.
Hazardous Decomposition Products:NONE KNOWN AT THIS TIME.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT ALLOW MATERIAL TO CONTAMINATE GROUND
    WATER SYSTEMS. DISPOSE I/A/W LOCAL, STATE & FEDERAL DISPOSAL
    REQUIREMENTS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.