PARKER PAINT -- 3800, WALL GLOW MEDIUM BASE  -- 8010-00N031115
<pre>=====================  Product Identification  =====================

Product ID:3800, WALL GLOW MEDIUM BASE
MSDS Date:06/01/1987
FSC:8010
NIIN:00N031115
MSDS Number: BPJTQ
=== Responsible Party ===
Company Name:PARKER PAINT
Address:3326 SOUTH JUNETT
Box:11047
City:TACOMA
State:WA
ZIP:98411-0047
Country:US
Info Phone Num:206-473-1122
Emergency Phone Num:206-473-1122
Preparer's Name:B. WEAR
CAGE:9H480
=== Contractor Identification ===
Company Name:PARKER PAINT
Address:3003 SOUTH TACOMA WAY
Box:11047
City:TACOMA
State:WA
ZIP:98409
Country:US
Phone:253-473-1122
CAGE:9H480

=============  Composition/Information on Ingredients  =============

Ingred Name:SILICA, CRYSTALLINE-FUSED; (SILICON DIOXIDE)
CAS:60676-86-0
RTECS #:VV7328000
Fraction by Wt: <5.0%
OSHA PEL:SEE TABLE Z3
ACGIH TLV:0.1 MG/M3 RDUST;9293

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INHAL:INHAL OF HIGH CONC OF
    VAPORS MAY CAUSE HDCH, NAUS & IRRIT OF NOSE, THROAT & LUNGS.
    EYE:MAY CAUSE IRRIT/ BURNING OF EYES. SKIN:RPTD LIQUID CONTACT MAY
    CAUSE IRRIT AND DERMATITIS. INGEST:GI  IRRIT, NAUS, VOMITING &
    DIARRHEA. VOMITING CAN RESULT IN ASPIR OF MATL INTO THE LUNGS WHICH
    CAN CAUSE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: CHEMICAL PNEUMONITIS. CHRONIC:
    UNPROTECTED OVEREXPOSURE TO MISTS FROM SPRAY APPLICATION MAY CAUSE
    LUNG DISEASE (SILICOSIS).
Medical Cond Aggravated by Exposure:NONE KNOWN AT THIS TIME.

=======================  First Aid Measures  =======================

First Aid:INHAL:REMOVE TO FRESH AIR. IF BREATHING STOPS, APPLY ARTF
    RESP. CALL MD. EYE:WASH WITH CLEAN WATER FOR AT LEAST 15 MINUTES.
    CALL MD. SKIN:WASH AFFECTED AREAS WITH SOAP AND WATER. REMOVE
    CONTAMINATED C LOTHING. CALL MD. INGEST:DRINK 1 OR 2 GLASSES OF
    WATER TO DILUTE. CALL MD OR POISON CONTROL CENTER IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WATER MAY BE USED TO COOL CLOSED
    CONTAINERS TO PREVENT PRESSURE BUILDUP AND EXPLOSION WHEN EXPOSED
    TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA. PREVENT SKIN AND EYE CONTACT
    AND BREATHING OF VAPOR. CONTAIN AND REMOVE WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 200F.
Other Precautions:DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF
    CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT REQUIRED FOR BRUSH AND ROLL APPLICATION. FOR
    SPRAY APPLICATION, WEAR A PROPERLY FITTED NIOSH/MSHA (TC-23C)
    APPROVED VAPOR/PARTICULATE RESPIRATOR UNTIL ALL VAPORS AND SPRAY
    MIST ARE EXHAUSTED.
Ventilation:PROVIDE SUFFICIENT VENT IN VOLUME & PATTERN TO KEEP AIR
    CONTAM CONC <APPLIC OSHA PEL OR ACGIH TLV OCCUP EXPOS LIMITS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:COVERALLS, GLOVES & HOOD ARE REC DURING
    SPRAY APPLICATN. PROT CREAMS MAY BE USED FOR EASE OF CLEAN-UP, NOT
    FOR PROT.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING RESTROOM.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

HCC:N1
Boiling Pt:B.P. Text:212F,100C
Vapor Density:LTR/AIR
Spec Gravity:1.2 (H2O=1)
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:WHITE COLORED LIQUID WITH AMMONIACAL ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN AT THIS TIME.
Stability Condition to Avoid:DO NOT HEAT ABOVE 200F.
Hazardous Decomposition Products:NONE KNOWN AT THIS TIME.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT ALLOW MATERIAL TO CONTAMINATE GROUND
    WATER SYSTEMS. ABSORB LARGE SPILLS WITH SAND, CLAY, OR DIATOMACEOUS
    EARTH. DISPOSE IN ACCORDANCE WITH LOCAL, STATE & FEDERAL DISPOSAL
    REQUIREMENTS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.