=====================  Product Identification  =====================

Product ID:ELITE DIAMOND FINISH - SATIN
MSDS Date:01/08/1991
FSC:8010
NIIN:00B060029
MSDS Number: BKRFL
=== Responsible Party ===
Company Name:FLECTO COMPANY
Address:1000 45TH STREET
City:OAKLAND
State:CA
ZIP:94608
Country:US
Info Phone Num:415-655-2470
Emergency Phone Num:415-655-2470
CAGE:DO858
=== Contractor Identification ===
Company Name:FLECTO CO INC
Address:1000 45TH ST
Box:City:OAKLAND
State:CA
ZIP:94608-3314
Country:US
Phone:800-635-3286
CAGE:58381
Company Name:FLECTO COMPANY
Address:1000 45TH STREET
Box:City:OAKLAND
State:CA
ZIP:94608
Country:US
Phone:415-655-2470
CAGE:DO858

=============  Composition/Information on Ingredients  =============

Ingred Name:1-METHYLPYRROLIDONE
CAS:872-50-4
RTECS #:UY5790000
Fraction by Wt: <5.0%
Other REC Limits:NONE SPECIFIED
OSHA PEL:100 PPM
ACGIH TLV:100 PPM

Ingred Name:PROPYLENE GLYCOL
CAS:57-55-6
RTECS #:TY2000000
Fraction by Wt: <5.0%
Other REC Limits:NONE SPECIFIED

Ingred Name:DIPROPYLENE GLYCOL METHYL ETHER
CAS:34590-94-8
RTECS #:JM1575000
Fraction by Wt: <5.0%
Other REC Limits:NONE SPECIFIED
OSHA PEL:S,100PPM/150STEL
ACGIH TLV:S,100PPM/150STEL9192

Ingred Name:N-BUTOXYPROPANOL
CAS:5131-66-8
Fraction by Wt: <5.0%
Other REC Limits:NONE SPECIFIED

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:THE HEALTH EFFECTS OF THIS PRODUCT
    HAVE NOT BEEN TESTED. MAY BE HARMFUL IF SWALLOWED.
Explanation of Carcinogenicity:NONE OF THE CHEMICALS IN THIS PRODUCT IS
    LISTED BY IARC, NTP OR OSHA AS A CARCINOGEN.
Effects of Overexposure:MAY CAUSE IRRITATION TO NOSE, THROAT OR LUNGS. 
    ALSO MAY CAUSE SKIN AND EYE IRRITATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH IMMEDIATELY WITH LARGE AMOUNTS OF WATER FOR AT
    LEAST 15 MIN., CONSULT PHYSICIAN.  SKIN: WASH AFFECTED AREAS WITH
    SOAP AND WATER.  INHALATION: REMOVE TO FRESH AIR. RESTORE/SUPPORT
    BREATHING , CONSULT PHYSICIAN.  INGSETION: CALL PHYSICIAN
    IMMEDIATELY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:NONE
Lower Limits:1.1%
Upper Limits:14.4%
Extinguishing Media:FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:MATERIAL WILL NOT SUPPORT COMBUSTION. USE
    WATER TO KEEP FIRE EXPOSED CONTAINERS COOL TO REDUCE PRESSURE.
Unusual Fire/Explosion Hazard:KEEP AWAY FROM HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:AVOID BREATHING VAPORS. VENTILATE AND REMOVE
    WITH INERT ABSORBENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE OR USE NEAR HEAT. DO NOT
    GET IN EYES.
Other Precautions:DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF
    CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:APPROVED MASK OR RESPIRATOR FOR ORGANIC VAPORS
    AS NECESSARY.
Ventilation:ADEQUATE VOLUME AND PATTERN TO AVOID VAPOR CONCENTRATION IN
    EXCESS OF TLV OR LEL.
Protective Gloves:GLOVES ARE REQUIRED FOR DIRECT CONTACT.
Eye Protection:SAFETY GOGGLES/GLASSES WITH SHIELDS.
Other Protective Equipment:WEAR PROTECTIVE CLOTHING WHENEVER POSSIBLE.
Work Hygienic Practices:DO NOT TAKE INTERNALLY.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:338F,170C
Vapor Density:>AIR
Spec Gravity:1.0
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:COMPLETE
Appearance and Odor:MILKY APPEARANCE WITH A SLIGHT ACRYLIC ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
MAY REACT WITH STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:EXCESSIVE HEAT, CORROSIVE ATMOSPHERS,
    EXCESSIVE AGING.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
    FEDERAL, STATE AND LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.