PARKER PAINT -- FLEXGLOW, 310  -- 8010-00N060467
<pre>=====================  Product Identification  =====================

Product ID:FLEXGLOW, 310
MSDS Date:04/01/1994
FSC:8010
NIIN:00N060467
MSDS Number: BXTWZ
=== Responsible Party ===
Company Name:PARKER PAINT
Address:3003 SOUTH TACOMA WAY
Box:11047
City:TACOMA
State:WA
ZIP:98409
Country:US
Info Phone Num:206-473-1122
Emergency Phone Num:800-255-3924
Preparer's Name:J BURNWORTH
CAGE:9H480
=== Contractor Identification ===
Company Name:PARKER PAINT
Address:3003 SOUTH TACOMA WAY
Box:11047
City:TACOMA
State:WA
ZIP:98409
Country:US
Phone:253-473-1122
CAGE:9H480

=============  Composition/Information on Ingredients  =============

Ingred Name:NON-HAZARDOUS INGREDIENTS
OSHA PEL:N/K 
ACGIH TLV:N/K 

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:ACUTE:OVEREXP MAY CAUSE HDCH, NAUS,
    SKIN & EYE IRRIT. INHAL MAY CAUSE HDCH, NAUSEA & IRRIT OF NOSE,
    THROAT & LUNGS. EYE CONTACT MAY CAUSE IRRIT/BURNING OF EYES. RPTD
    LIQUID CONTACT MAY CAUSE SKIN IRRI T & DERM. INGEST MAY CAUSE GI
    IRRIT, NAUSEA, VOMITING & DIARRHEA. VOMIT CAN RSLT IN ASPIR OF
    MATL(EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: INTO LUNGS WHICH CAN CAUSE CHEMICAL
    PNEUMONITIS. CHRONIC: LONG TERM UNPROTECTED OVEREXPOSURE TO MISTS
    FROM SPRAY APPLICATION MAY CAUSE LUNG DISEASE (SILICOSIS).
Medical Cond Aggravated by Exposure:NONE KNOWN AT THIS TIME.

=======================  First Aid Measures  =======================

First Aid:INHAL: REMOVE TO FRESH AIR. IF BRTHG HAS STOPPED, APPLY ARTF
    RESP. CONSULT MD. EYE: WASH EYES W/CLEAN WATER FOR AT LEAST 15
    MINS. CONSULT MD. SKIN: WASH AFFECTED AREAS W/SOAP & WATER. REMOVE
    CONTAMD C LTHG. CONSULT MD. INGEST: DRINK 1 - 2 GLASSES OF WATER TO
    DILUTE. CONSULT MD/POISON CONTROL CENTER IMMED.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:FOAM, ALCOHOL FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
    PROTECTIVE EQUIPMENT.
Unusual Fire/Explosion Hazard:WATER MAY BE USED TO COOL CLSD CNTNRS TO
    PREVENT PRESSURE BUILDUP & EXPLOSION WHEN EXPOSED TO EXTREME HEAT.

==================  Accidental Release Measures  ==================

Spill Release Procedures:VENTILATE AREA. PREVENT SKIN & EYE CONTACT &
    BREATHING FO VAPOR. CONTAIN & REMOVE W/INERT ABSORBANT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE ABOVE 200F.
Other Precautions:DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF
    CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT REQUIRED FOR BRUSH & ROLL APPLICATION. FOR
    SPRAY APPLICATION, WEAR A PROPERLY FITTED NIOSH/MSHA(TC-23C)
    APPROVED VAPOR/PARTICULATE RESPIRATOR UNTIL ALL VAPORS & SPRAY MIST
    ARE EXHAUSTED.
Ventilation:PROVIDE SUFF VENT IN VOL & PATTERN TO KEEP AIR CONTAM CONC
    BELOW APPLIC OSHA PEL/ACGIH TLV OCCUP EXPOS LIMS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGS.
Other Protective Equipment:EMERGENCY EYEWASH & DELUGE SHOWER MEETING
    ANSI DESIGN CRITERIA. COVERALLS, GLOVES & HOOD ARE RECOMM
    DURING(SUPDAT)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
OTHER PROT EQUIP: SPRAY APPLIC, PROTECTIVE CREAMS MAY BE USED FOR EASE
    OF CLEAN-UP, NOT FOR PROTECTION.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212F,100C
Vapor Density:LTR/AIR
Spec Gravity:1.28(H*20=1)
Evaporation Rate &amp; Reference:SLOWER THAN ETHER
Solubility in Water:DILUTABLE
Appearance and Odor:MULTI COLORED LIQUID W/AMMONIACAL ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE KNOWN AT THIS TIME.
Stability Condition to Avoid:DO NOT HEAT ABOVE 200F.
Hazardous Decomposition Products:NONE KNOWN AT THIS TIME.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DO NOT ALLOW MATERIAL TO CONTAM GROUND WATER
    SYSTEMS. ABSORB LGE SPILLS W/SAND, CLAY OR DIATOMACEOUS EARTH.
    DISPOSE OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL REQUIREMENTS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.